PoE Midspan, 1 Port, IEEE802.3at, Gigabit, 30W, C14, 100-240VAC

€44,90
€44,90
plus VAT. plus Shipment
Availability: Low inventory: 4 left over
Article no: 030118
PoE Midspan, 1 Port, IEEE802.3at, Gigabit, 30W, C14, 100 - 240VAC - EastekOnlineshop
€44,90
€44,90

PoE Midspan, 1 Port, IEEE802.3at, Gigabit, 30W, C14, 100-240VAC


  • Detection, disconnection according to standard IEEE802.3at
  • Overload, voltage control according to IEEE802.3at
  • Gigabit compatible
  • Diagnostic LEDs
  • Compact dimensions: 140x65x36mm

For powering Axis network cameras and Xovis people counters

With the ALLNET ALL0488V6 Power over Ethernet injector, you can install your PoE-capable IP devices such as WLAN access points, VoIP phones, and much more completely independent of existing power outlets.

This allows you to choose the most ideal installation locations for WLAN access points in a building without having to consider the power cabling.

Non-PoE-capable switches can be easily "retrofitted" with Power over Ethernet, especially when only a few ports with PoE supply are needed.Here, the ALL0488V6 saves the purchase of a PoE switch.

The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a power of up to 30W.

The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, through which the switch and end device are connected to the PoE injector. The cable length can be, as is common in Ethernet, up to 100 meters in total between the switch and end device.

Due to its compact design, the ALLNET ALL0488V6 can be installed very inconspicuously. It has an internal power supply and delivers the PoE voltage on pins 4,5 (+) and 7,8 (-).

Technical Data:

Element

Specification

Supported Standards:
  • IEEE802.3at Power over Ethernet PoE+
  • IEEE802.3af Power over Ethernet
  • IEEE802.3 10BaseT
  • IEEE802.3u 100BaseTX
  • IEEE802.ab 1000BaseT

Ethernet Ports:
  • 1x RJ45 10/100/1000 Mbps for connection to switch or hub
  • 1x RJ45 10/100/1000 for connection to PoE device

PoE Output:
 		 PoE IEEE802.11af/at, PoE Midspan, power connections: 4.5(+) 7.8(-)

Power supply:

100 - 240VAC, internal power supply / Output: 55V/550mA including connection cable protective contact to IEC320-C5 "Mickey Mouse" approx. 80cm length.

Power consumption:

30 Watts maximum with connected PoE end device
AC surge protection:
  • 1.0KV (5P/5N)
  • L-N 1.2/50 (8/20) Tr/Th us
  • 2.0KV (5P/5N)
  • L-PE 1.2/50 (8/20) Tr/Th us
  • N -PE

Housing:

Plastic housing

Installation:

 Wall mounting possible

Dimensions:

Length/Width/Height: 40 x 63 x 33 mm

Environment:

Operating temperature: 0 ~ 40 °C
Operating humidity: 10% ~ 90% (non-condensing)
Storage temperature: -20 ~ 90 °C
Storage humidity: 5% ~ 90% (non-condensing)

EMI:
  • FCC CFR47 Part 15
  • EN55024
  • EN55032

EMS:
  • IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)
  • IEC61000-4-3(RS) 10V/m(80MHz~2GHz)
  • IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV
  • IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM
  • IEC61000-4-6(CS) 10V(150kHz~80MHz)

Immunity.
 
  • IEC60068-2-6 (Vibration)
  • IEC60068-2-27 (Impact)
  • IEC60068-2-32 (Free Fall)

Label:

CE; FCC Class A